Tempered glass panel partition for shop front

Full tempered glass panel for the wall at the shop front. This method of partitioning enables plenty of light to stream in. Apart from this benefit, there is an element of design and modern look to the entrance of the premises.

Tempered glass partition at Selangor for offices

1. Tempered glass panel in Klang Valley, Selangor is popularly used for walling and partitioning applications to construct offices, meeting rooms or showrooms.

2. The tempered glass panel which is order made in sizes can be effectively used to divide open areas in an office into smaller rooms for various purposes.

3. It's lightweight construction and speed of installation features made it an outstanding partitioning application choice with the interior designer and renovation contractor.

Suspended ceiling work - Coordination on the installation process

1. The suspended ceiling work at Port Klang, Selangor for an engineering company incurred us extra cost in materials and labour / man-hours due to oversight on the coordination of the whole suspended ceiling construction process. Hence, this posting as reminder for future suspended ceiling work with the same conditions.

2. Sprinkle system alteration work, if there is any, is to go first before constructing the framework suspension system. Water that sprinkle out during the alteration work will spread to the suspension framework and cause it to rust. If there is already gypsum board partition wall being constructed, damage to the wall may happen if the board is not of water resistant type. 

3. Wiring and ducting work are to go first or before gypsum ceiling board is put up. The wiring work will be very much slowed down if it is done after the ceiling board is put up. That is apart form the high possibility if dirtying the ceiling board.

4. Hanger wire for light box cannot be drawn from the wire meant to hang the suspension system and ceiling board. The strength of the wire hanger suspension will be compromised if this is done, resulting in dropping or sagging ceiling in the future.

Gypsum board partition at Selangor for an engineering plant

1. In this posting, I want to share how we construct the gypsum board partition around and in the midst of angles and corners of steel columns to make offices. meeting rooms and laboratories for an engineering plant at Port Klang, Selangor.

2. Photos 3, 4,and 5 show the way the metal studs were being installed so that protruding corner and angle of the I-beam are being covered to give a nice one linear partition wall finishing.

3. As you can see in photos 7 and 8, the gypsum board partition constructed on to this big I-beam platform has the finishing of one big 130 feet in length wall with no visible angles, edges and corners, looking from the outside.

 

Glass partition as decorative wall panel

1. Glass partition serving as decorative wall panel is popularly used in many showrooms in Klang Valley, Selangor. A case in point - the tempered glass panel, besides serving as divider, also stands out in decoration and design for this outlet.

2. There are plentiful of beautiful decorative films that can be pasted on to the glass panel on door and glass partition to create fantastic design. In a way, design on glass panel has been made easy by the availability of these films. ( There are shops in Mid Valley and 1 Utama selling a wide varieties of decorative films ).

3. Clear glass provides the ideal background to bring out the beauty that these decorative films can provide.

Glass partition wall - simple but nice

1. As the glass partition wall is high, the safety tempered glass is a must in the construction.

2. Clear glass is used for the partition wall to maintain the "feel" of spaciousness in spite of the division of space for different functions. In this case, it's to display different category of products. In other cases, glass partition wall can be used as divider to make rooms for different office activities .

Gypsum board partition maintenance - safety guider

1. Common problem faced by factories with gypsum board partition offices and rooms in their production or assembly areas is dented or broken wall caused by the the pallet trolley and hand pallet truck.

2. Gypsum board partition wall can be easily dented when knocked by the moving trolley inside the factory. Even bricks wall is not spared. When trolley and hand truck is always used, the maintenance cost on the partition wall can be very high due the the high tendency of the knocking.

3. Some factories have the bottom of the partition wall installed with high aluminium strip skirting as shown in photo 4. But that will not help much as the aluminium strip is not thick enough to take the impact of the knock.

4. Safety guider can be considered to reduce the rate of partition wall being dented by knocking caused by the moving trolley and hand truck. Photos 5 and 6 show the safety guider being installed for such purpose.

5.Safety guider can be custom made in length and height to suit the requirement of specific factory environment as shown in photo 7.